Like all Crusader caravans, the Excalibur Range is constructed using a 42mm one-piece composite floor to fully insulate against cold or heat creep from the ground. Presented in a full composite construction, the Duke offers a payload of around 700kg while the tandem independent suspension system with coil springs and shock absorbers is load rated to 3300kg.
From the outside
The smooth-sided composite look found in all Excalibur models is easy to clean and designed to withstand the trials and tribulations of extended travel. The Duke offers a large front toolbox with both a generator slide and a BBQ slide, as well as a generous checker plate lined tunnel boot and external fixtures such as a picnic table, an external TV hutch and an external hot and cold shower to help you enjoy the great outdoors.
Inside in style
The Excalibur Duke features a huge amount of living space enhanced by higher (80″) ceilings oversized windows, bright LED lights and a gloss ceiling and there is extensive storage space throughout, including a pull-out pantry with baskets and drawers. The kitchen is equipped with a fan-forced oven and four-burner cooktop, two-door AES refrigerator, microwave, a sizeable sink and a water filter; let’s not forget the TV combo.
With your own supply of water, gas and electricity, and your inbuilt grey water tank, you can take your Excalibur anywhere and not have to give up any of your modern conveniences. Your 120ah deep cycle battery is recharged by the two 170w solar panels or your car whilst towing. The whole Excalibur range comes standard with two 9kg gas cylinders and two 95 litre water tanks that can be filled separately.
PLEASE NOTE: Excalibur SCV model featured in the video above.
“Excalibur Montage” video uploaded on 22/09/2021.
* Crusader Caravans reserve the right to alter specifications without notice. Specifications may vary subject to availability and E&OE (Errors & Omissions Excepted).
* Specifications and details featured in these videos were current at the time of filming and may vary subject to availability and E&OE.
*Indicative lengths and weights are for standard configuration, any additional options or variations will increase weights. Weights are approximate only and can vary between individual caravans. The Compliance Plate specifies the accurate weight for each respective caravan. Alterations to designated ATM may be requested at the time of order provided it does not exceed the legal maximum and is subject to the final tare weight. Body length is measured externally from the front wall to the back wall. Overall length is measured externally from the A-Frame coupling to the back wall. Overall width is measured externally and includes all protruding fixtures.
Updated as at 30/06/2023. Current models may not be pictured.